|
Equalization, equalisation or EQ is the process of using passive or active
electronic elements or digital algorithms for the purpose of altering
(originally flattening) the frequency response characteristics of a system.
Amplitude equalization is usually meant when it is stated without qualification
but any frequency dependant response characteristic is capable of having
equalization applied. Most notably there is phase and time-delay equalizations.
There is also spatial directivity equalization.
Many thing
in our daily need that can be easily by implement a simple applied technology.
So our life become easy and comfort. We can make anything work automatic, or
work without our intervention so if we forget to run it, or to turn off it, they
will be done by their shelf.
By a simple
applied technology, such as electronics, we can solve many simple problem as
mentioned above. With the small dimension of electronic component and small
power too, we can realize our need, such as automatic lamp, remote controller,
water tank level controller.
Beside all
that mention above, we can make many device that valuable to our need, such as
decorative lamp, amplifier, detector etc. The simple applied electronic circuits
are divided in to two groups, analog and digital circuitry.
Analog
electronic circuits are those in which signals may vary continuously with time
to correspond to the information being represented. Electronic equipment like
voltage amplifiers, power amplifiers, tuning circuits, radios, and televisions
are largely analog (with the exception of their control sections, which may be
digital, especially in modern units).
In digital
electronic circuits, electric signals take on discrete values, which are not
dependent upon time, to represent logical and numeric values. These values
represent the information that is being processed. The transistor is one of the
primary components used in discrete circuits, and combinations of these can be
used to create logic gates. These logic gates may then be used in combination to
create a desired output from an input. In this page you can find one of the
circuit.
5 Channel Equalizer
Rangkaian berikut dapat digunakan sebagai equalizer 5
kanal sederhana yang murah. Prinsip kerja dari rangkaian ini adalah
rangkaian pelewat frekuensi pita dengan frekuensi tengah sebesar 10 KHz; 2,5
KHz; 625 Hz; 155Hz dan 40 Hz. Dengan menggunakan potensiometer, maka nilai
penguatan tiap pelewat frekuensi pita dapat dibuat berubah-ubah. Kelima
pelewat frekuensi pita tersebut dijumlahkan menggunakan rangkaian pencampur
transistor.

Gambar 1. Rangkaian equalizer 5 kanal

|